External publications

Work package 1: Aero-elastic code and simulation of performance, dynamics and loads
 

Luca Vita “Offshore Floating Vertical Axis Wind Turbines with rotating platform”. Risø-PhD-80(EN) August 2011.

Helge Aagaard Madsen ”The Actuator Cylinder – A Flow Model for Vertical Axis Wind Turbines”. Aalborg University Centre, January 1982.

HAa Madsen, US Paulsen L Vitae (2012), Analysis of VAWT aerodynamics and design using the Actuator Cylinder flow model, Paper presented at the conference, The Science of Making Torque from Wind October 9-11, 2012. Oldenburg (Oldb), Germany

HAa Madsen, TJ Larsen, US Paulsen, L Vita, (2013), Implementation of the Actuator Cylinder flow model in HAWC2 for aeroelastic simulations on Vertical Axis Wind Turbines. Paper AIAA 2013-0913 presented at 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 07 - 10 January 2013, Grapevine (Dallas/Ft. Worth Region), Texas

TJ Larsen, HAa Madsen (2013), On the Way to Reliable Aeroelastic Load Simulation on VAWT´s. Paper in Proceedings of EWEA 2013, European Wind Energy Conference & Exhibition, February 4-7, Vienna

Carstensen S., Mandviwalla X.,Vita, L., Paulsen U.S., “Lift of rotating circular cylinder in unsteady flows”, paper accepted for the proceedings of the The 22nd International Ocean and Polar Engineering Conference, ISOPE 2012, Rhodes, Greece

Ferreira CS, Madsen HAa, Barone M, Roscher B, Deglaire P and Arduin I, “Comparison of aerodynamic models for Vertical Axis Wind Turbines”. Paper presented at the Torque 2014 conference in June at DTU, Denmark

Paulsen US , Vita L, Madsen HA, Hattel J, Ritchie E, Leban KM, Berthelsen PA, Carstensen S 1st DeepWind 5 MW baseline U.S Paulsen/ Energy Procedia 00 (2013) 000–000 11 design. Energy Procedia 00 (2011) 000–000

Vita, L., Paulsen U.S., Madsen H.A., Nielsen P.H., Berthelsen P.A., Carstensen S., Design and aero-elastic simulation of a 5MW floating vertical axis wind turbine. Proceedings of the ASME 2012 International Conference on Ocean, Offshore and Arctic Engineering OMAE 2012, Rio de Janeiro, Brazil

Berthelsen, PA, Fylling I, Vita L, Paulsen US Conceptual Design Of A Floating Support Structure And Mooring System For A Vertical Axis Wind Turbine Proceedings of the ASME 2012 International Conference on Ocean, Offshore and Arctic Engineering OMAE 2012, Rio de Janeiro, Brazil

US Paulsen, HAa Madsen, JH Hattel, I Baranc, PH Nielsen, (2013), Design Optimization of a 5MW Floating Offshore Vertical-Axis Wind Turbine. DeepWind'2013, 24-25 January, Trondheim, Norway

David R.S. Verelst, Helge Aagaard Madsen, and Knud A. Kragh August 2014, Detailed Load Analysis of the baseline 5MW DeepWind Concept, DTU Wind Energy Report-XXX

  
  

Work package 2: Blade technology and blade design
  

Schmidt Paulsen, Uwe (Author); Aagaard Madsen , Helge (Author); Nielsen, Per Hørlyk (Author); Kragh, Knud Abildgaard (Author); Baran, Ismet (Author); Hattel, Jesper Henri (Author); Ritchie, Ewen (Author); Leban, Krisztina (Author); Svenden, Harald (Author); Berthelsen, Petter A. (Author) / DeepWind. From idea to 5 MW concept.
2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/14.


Baran, Ismet; Hattel, Jesper Henri; Akkerman, Remko / Investigation of process induced residual stresses and deformations for industrially pultruded parts having UD and CFM layers.
Proceedings - 12th World Pultrusion Conference. 2014.


Baran, Ismet; Hattel, Jesper Henri; Akkerman, Remko / Investigation of the spring-in of a pultruded L-shaped profile for various processing conditions and thicknesses. 
In: Key Engineering Materials, Vol. 611-612, 2014, p. 273-279.


Baran, Ismet; Akkerman, Remko ; Hattel, Jesper Henri / Material characterization of a polyester resin system for the pultrusion process.
In: Composites Part B: Engineering, Vol. 64, 2014, p. 194–201.


Baran, Ismet; Hattel, Jesper Henri; Akkerman, Remko ; Tutum, Cem Celal / Mechanical Modelling of Pultrusion Process: 2D and 3D Numerical Approaches.
In: Applied Composite Materials, 2014.


Tutum, Cem Celal; Baran, Ismet; Deb, Kalyanmoy / Optimum design of pultrusion process via evolutionary multi-objective optimization.
In: International Journal of Advanced Manufacturing Technology, Vol. 72, No. 9-12, 2014, p. 1205-1217.


Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri; Akkerman, Remko / Pultrusion of a vertical axis wind turbine blade part-I: 3D thermo-chemical process simulation.
In: International Journal of Material Forming, 2014.


Baran, Ismet; Hattel, Jesper Henri; Tutum, Cem Celal; Akkerman, Remko / Pultrusion of a vertical axis wind turbine blade part-II: combining the manufacturing process simulation with a subsequent loading scenario.
In: International Journal of Material Forming, 2014.


Schmidt Paulsen, Uwe; Aagaard Madsen , Helge; Kragh, Knud Abildgaard; Nielsen, Per Hørlyk; Baran, Ismet; Ritchie, E.; Leban, K.M.; Svendsen, H.; Berthelsen, P.A.; Bussel, G.J.W.van ; Ferreira, C.S.; Chrysochoidis-Antsos, N. / The 5 MW DeepWind floating offshore vertical wind turbine concept design -
status and perspective.
Proceedings - EWEA 2014. European Wind Energy Association (EWEA), 2014.


Baran, Ismet; Hattel, Jesper Henri; Akkerman, Remko / The effect of mandrel configuration on the warpage in pultrusion of rectangular hollow profiles.
In: Key Engineering Materials, Vol. 611-612, 2014, p. 250-256.


Baran, Ismet; Carlone, Pierpaolo ; Hattel, Jesper Henri; Palazzo, Gaetano S. ; Akkerman, Remko / The Effect of Product Size on the Pulling Force in Pultrusion.
In: Key Engineering Materials, Vol. 611-612, 2014, p. 1763-1770.


Baran, Ismet; Hattel, Jesper Henri; Tutum, Cem C. / 3D thermo-chemical-mechanical analysis of the pultrusion process.
In: Risoe International Symposium on Materials Science. Proceedings, Vol. 34, 2013, p. 169-176.


Carlone, P.; Baran, Ismet; Hattel, Jesper Henri; Palazzo, G.S. / Computational Approaches for Modeling the Multiphysics in Pultrusion Process.
In: Advances in Mechanical Engineering, Vol. 2013, 301875, 2013.


Schmidt Paulsen, Uwe; Aagaard Madsen , Helge; Hattel, Jesper Henri; Baran, Ismet; Nielsen, Per Hørlyk / Design Optimization of a 5 MW Floating Offshore Vertical-axis Wind Turbine.
In: Energy Procedia, Vol. 35, 2013, p. 22-32.


Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri / Evaluation of the process induced residual stresses at the web-flange junctions of pultruded GFRP profiles.

Proceedings of the 17th International Conference on Composite Structures (ICCS). 2013.


Baran, Ismet; Carlone, P.; Hattel, Jesper Henri; Palazzo, G.S. / Numerical and semi-analytical modelling of the process induced distortions in pultrusion.
In: Risoe International Symposium on Materials Science. Proceedings, Vol. 34, 2013, p. 161-168.


Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri / Optimization of the Thermosetting Pultrusion Process by Using Hybrid and Mixed Integer Genetic Algorithms.
In: Applied Composite Materials, Vol. 20, No. 4, 2013, p. 449-463.


Baran, Ismet; Hattel, Jesper Henri; Tutum, C.C. / Probabilistic modelling of the process induced variations in pultrusion.
Proceedings of 19th International Conference on Composite Materials (ICCM19). ed. / Suong Van Hoa; Pascal Hubert. Canadian Association for Composite Structures and Materials, 2013. p. 6308-6319.


Baran, Ismet; Tutum, Cem Celal; Nielsen, Michael Wenani; Hattel, Jesper Henri / Process induced residual stresses and distortions in pultrusion.
In: Composites Part B: Engineering, Vol. 51, 2013, p. 148–161.


Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri / Reliability Estimation of the Pultrusion Process Using the First-Order Reliability Method (FORM).
In: Applied Composite Materials, Vol. 20, No. 4, 2013, p. 639-653.


Baran, Ismet; Hattel, Jesper Henri / The effect of mandrel heating on the quality of the pultrusion process.
Proceedings of the 24th Annual International SICOMP Conference. 2013.


Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri / The effect of thermal contact resistance on the thermosetting pultrusion process.
In: Composites Part B: Engineering, Vol. 45, No. 1, 2013, p. 995-1000.


Baran, Ismet; Hattel, Jesper Henri; Tutum, C.C. / The impact of process parameters on the residual stresses and distortions in pultrusion.
Proceedings of 19th International Conference on Composite Materials (ICCM19). ed. / Suong Van Hoa; Pascal Hubert. Canadian Association for Composite Structures and Materials, 2013. p. 6328-6337.


Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri / The Internal Stress Evaluation of Pultruded Blades for a Darrieus Wind Turbine.
In: Key Engineering Materials, Vol. 554-557, 2013, p. 2127-2137.


Baran, Ismet; Hattel, Jesper Henri; Tutum, Cem Celal / Thermo-Chemical Modelling Strategies for the Pultrusion Process.
In: Applied Composite Materials, Vol. 20, 2013, p. 1247–1263.


Tutum, Cem Celal; Baran, Ismet; Hattel, Jesper Henri / Utilizing multiple objectives for the optimization of the pultrusion process based on a thermo-chemical simulation.
In: Key Engineering Materials, Vol. 554-557, 2013, p. 2165-2174.


Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri / Investigation of the thermal contact resistance in thermosetting pultrusion process.
Proceedings of the 20th International Conference on Composites/Nano Engineering. 2012.


Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri / Probabilistic thermo-chemical analysis of a pultruded composite rod.
Proceedings of the 15th European Conference on Composite Materials. 2012.


Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri / Thermo-chemical simulation of a composite offshore vertical axis wind turbine blade.
Proceedings of the European Wind Energy Conference. 2012.


Baran, Ismet; Özgen, Gökhan O.; Cigeroglu, Ender / Bir radar anten yapisinin titresim özelliklerinin topolojik optimizasyon teknigi ve destek elemanlari kullanilarak iyilestirilmesi. Proceedings of the 15th Ulusal Makine Teorisi Sempozyumu (UMTS2011). 2011.


Baran, Ismet; Özgen, Gökhan O.; Cigeroglu, Ender / Bir radar anten yapisinin titresim özelliklerinin topolojik optimizasyon teknigi ile iyilestirilmesi.
Proceedings of the Congress of Defense Technologies (SAVTEK2010). 2010. p. 167-177.

 
  

Work package 3: Generator concepts
  

Ferrofluid in the air gap: Optimised electrical generator for wind turbines; Paco Phillip Yoncaova, Fitim Kryezi, Aina Romaní Dalmau Energi, Bachelor final project (Aalborg), (Bacheloruddannelse) 6. semester, 2013

Ferrofluid in the air gap - optimised electrical generator for wind turbines; Rolant Joanesarson Olsen, Ragnar Sigurbjørnsson, Laia Casamitjana; Energi, Bachelor final project (Aalborg), (Bacheloruddannelse) 6. semester, 2013

Leban K, Ritchie E, Alin A. Design Tool for 5-10 MW Direct Drive Generators. Electromotion journal Vol 21 (2014 ) 2014; ISSN 1223 - 057X.

Leban K, Ritchie E, Argeseanu A. Design preliminaries for direct drive under water wind turbine generator. Electrical Machines (ICEM), 2012 XXth International Conference on IEEE, 2012 2012:190-5.

Marie-Christine Schimmelmann, Elena Charlotte Malz, Enrique Müller Llano, Lennart Petersen, Theodoros Kalogiannis, Krisztina Monika Leban, Andrew Ewen Ritchie. Alternative Parameter Determination Methods for a PMSM . Optimization of Electrical and Electronic Equipment (OPTIM), 2014 14th International Conference on 2014

Nedelcu S, Ritchie E, Leban K, Ghita C, Trifu I. Iron losses evaluation in soft magnetic materials with a sinusoidal voltage supply. Advanced Topics in Electrical Engineering (ATEE), 2013 8th International Symposium on 2013:1-6.

Trifu I, Leban,Krisztina Monika, Ritchie, Ewen. Influence of Closed Stator Slots on Cogging Torque. Proceedings of the 10th Jubilee International Symposium on Advanced Electrical Motion Systems-Electromotion 2013 Cluj-Napoca, Romania;Volume 20, Number 1-4 January-December 2013:ISSN 1223-057x.

Nica FTV, Ritchie E, Leban K. A comparison between two optimized TFPM geometries for 6 MW direct-drive wind turbines. Advanced Topics in Electrical Engineering (ATEE), 2013 8th International Symposium on IEEE 2013.

Nica FTV, Ritchie E, Leban KM. Comparison between Genetic Algorithms and Particle Swarm Optimization Methods on Standard Test Functions and Machine Design. Proceedings of the 10th Jubilee International Symposium on Advanced Electrical Motion Systems-Electromotion 2013 Cluj-Napoca, Romania 2013;Volume 20, Number 1-4 January-December 2013:ISSN 1223-057x.

Nica FVT, Leban K, Ritchie E. Direct drive TFPM wind generator analytical design optimised for minimum active mass usage. 8th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2013.

Argeseanu A, Ritchie E, Leban K. Optimal design of the transverse flux machine using a fitted genetic algorithm with real parameters. Optimization of Electrical and Electronic Equipment (OPTIM), 2012 13th International Conference on 2012:671-8.

Ritchie E, Leban K, Trintis I, Friis Pedersen T, Schmidt Paulsen U, Vita L. Design And Bench Tests of Converter Driven 1kW Underwater Induction Generator for the Deep Wind Project. Proceedings of the 10th Jubilee International Symposium on Advanced Electrical Motion Systems-Electromotion 2013 Cluj-Napoca, Romania 2013;Volume 20, Number 1-4 January-December 2013:ISSN 1223-057x.

Zaidi A, Senn L, Ortega I, Radecki P, Szczesny I, Erkec M, Ritchie E., Leban K.M; 6 MW direct drive wind turbine generator design. Electrical Machines (ICEM), 2012 XXth International Conference on IEEE, 2012 2012.

U.S.Paulsen, H.A.Madsen, K.A.Kragh, P.H.Nielsen, E.Ritchie, K.M.Leban, H. Svendsen, P.A. Berthelsen. The 6 MW DeepWind floating offshore vertical wind turbine concept design-status and perspective . EWEA 2014 2014;Energy Procedia, Science Direct.

Uwe S. Paulsen, Helge A. Madsen, Knud A. Kragh, Per H. Nielsen, Ismet Baran, Jesper Hattel, Ewen Ritchie, Krisztina Leban, Harald Svendsen, Petter A. Berthelsen. DeepWind-from idea to 6 MW concept. Energy Procedia, Science Direct 2014;EERA DeepWind’2014, 11th Deep Sea Offshore Wind R&D Conference.

Paulsen US, Vita L, Madsen HA, Hattel J, Ritchie E, Leban KM et al. First DeepWind 6 MW Baseline design. Energy Procedia Volume 24, 2012, Pages 27–35 Selected papers from Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 19-20 January 2012 2012.

Argeseanu A, Nica FTV, Ritchie E, Leban K. A New Geometrical Construction using Rounded Surfaces proposed for the Transverse Flux Machine for Direct Drive Wind Turbine. Optimization of Electrical and Electronic Equipment (OPTIM), 2014 14th International Conference on Accepted, Publication Pending.

 
  

Work package 4: Turbine operational control
  

H.G. Svendsen, K.O. Merz, DeepWind deliverable D4.1: Description of simplified numerical model relevant for development of control concepts, Technical Report, SINTEF Energy Research, TR A7179 (2012).

H.G. Svendsen, K.O. Merz, DeepWind deliverable D4.2: Description of rotor control concepts, Technical Report, SINTEF Energy Research, TR F7301 (2013).

H.G. Svendsen, A.G. Endegnanew, DeepWind deliverable D4.3: Description of control concepts for grid code compliance, Technical Report, SINTEF Energy Research, TR F7343 (2014).

K.O. Merz, H.G. Svendsen , A Baseline Control Algorithm for the Deepwind Floating Vertical-Axis Wind Turbine, J. Renewable Sustainable Energy 5 (2013) 063136,


H.G. Svendsen, K.O. Merz, Control System for Start-up and Shut-down of a Floating Vertical Axis Wind Turbine, Energy Procedia 35 (2013) 33–42,


K.O. Merz, A Method for Analysis of VAWT Aerodynamic Loads under Turbulent Wind and Platform Motion, Energy Procedia 24 (2012) 44–51,


H.G. Svendsen, K.O. Merz, A.G. Endegnanew, Control of floating vertical axis wind turbine, in Proceedings of EWEA 2012, Copenhagen, April 2012.

A.G. Endegnanew, H.G. Svendsen, Grid code compliance of the deepwind floating vertical axis wind turbine, in Proceedings of EWEA Offshore 2013, Frankfurt, Germany, November, 2013.

H.G. Svendsen , K.O. Merz, A.G. Endegnanew, Flytande vertikal-aksla vindturbin – Deepwind (Norwegian), NEF Teknisk Møte 2014, ISBN 978-82-594-3646-7

K.O. Merz, Optimal Gains of the Deepwind Control System, Project Memo, SINTEF Energy Research, AN12.12.46 (2012).

K.O. Merz, H.G. Svendsen, A Baseline Algorithm for Startup and Shutdown of the Deepwind Turbine, Project Memo, SINTEF Energy Research, AN12.12.75 (2012).

 
  

Work package 5: Mooring, floating and torque absorption systemns
  

Schmidt Paulsen, Uwe / Sizing of a spar-type floating support structure for DeepWind. DTU Wind Energy, 2013. 50 p. (DTU Wind Energy E; No. 0043).Publication: Research › Report – Annual report year: 2014

Paulsen, Madsen, Kragh, Nielsen, Baran, Ritchie, Leban, Svendsen, Berthelsen, van Brussel, Ferreira, Chrysochoidis-Antsos (2014), The 5 MW DeepWind floating offshore vertical turbine concept design – status and perspective, Proceedings of the EWEA2014 conference, Barcelona, Spain, March 10-13.

Paulsen, Madsen, Hattel, Baran, Nielsen, Ritchie, Leban, Svendsen, Berthelsen (2014), DeepWind-from idea to 5 MW concept, 11th Deep Sea Offshore Wind R&D Seminar, Trondheim, Norway, January 22-24, submitted to Energy Procedia.

P.A. Berthelsen, I. Fylling, L. Vita and U.S. Paulsen. Conceptual design of a floating support structure and mooring system for a vertical axis wind turbine. Proceedings of the ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering, OMAE2012. July 1-6, 2012, Rio de Janeiro, Brazil.

Vita, Paulsen, Madsen, Nielsen, Berthelsen and Carstensen (2012), Design and aero-elastic simulation of a 5MW floating vertical axis wind turbine, Proceedings of the ASME 31st International Conference on Ocean, Offshore and Arctic Engineering, OMAE2012, Rio de Janeiro, Brazil, July 1-6.

Paulsen, Vita, Madsen, Hattel, Ritchie, Leban, Berthelsen and Carstensen (2012), 1st DeepWind 5 MW baseline design, 9th Deep Sea Offshore Wind R&D Seminar, Trondheim, Norway, January 19-20, published in Energy Procedia 24, 27-35.

Paulsen, Pedersen, Madsen, Enevoldsen, Nielsen, Hattel, Zanne, Battisti, Brighenti, Lacaze, Lim, Heinen, Berthelsen, Carstensen, de Ridder, van Bussel, Tescione (2011), DeepWind – an innovative wind turbine concept for offshore, Proceedings of the EWEA2011 conference (Technology part), Brussels, Belgium, March 14-17.

 
  

Work package 6: Exploration of torque, lift and drag on a rotating tube
  

Carstensen, Stefan; Mandviwalla, Xerxes ; Vita, Luca; Schmidt Paulsen, Uwe / Lift of a Rotating Circular Cylinder in Unsteady Flows. In: Journal of Ocean and Wind Energy, Vol. 1, No. 1, 2014, p. 41-49.Publication: Research - peer-review › Journal article – Annual report year: 2014

Carstensen S., Mandviwalla X.,Vita, L., Paulsen U.S., “Lift of rotating circular cylinder in unsteady flows”, paper presented at the The 22nd International Ocean and Polar Engineering Conference, ISOPE 2012, Rhodes, Greece.

Vita, Paulsen, Madsen, Nielsen, Berthelsen and Carstensen (2012), Design and aero-elastic simulation of a 5MW floating vertical axis wind turbine, Proceedings of the ASME 31st International Conference on Ocean, Offshore and Arctic Engineering, OMAE2012, Rio de Janeiro, Brazil, July 1-6.

Paulsen, Vita, Madsen, Hattel, Ritchie, Leban, Berthelsen and Carstensen (2012), 1st DeepWind 5 MW baseline design, 9th Deep Sea Offshore Wind R&D Seminar, Trondheim, Norway, January 19-20, published in Energy Procedia 24, 27-35.

Paulsen, Pedersen, Madsen, Enevoldsen, Nielsen, Hattel, Zanne, Battisti, Brighenti, Lacaze, Lim, Heinen, Berthelsen, Carstensen, de Ridder, van Bussel, Tescione (2011), DeepWind – an innovative wind turbine concept for offshore, Proceedings of the EWEA2011 conference (Technology part), Brussels, Belgium, March 14-17.

 
 

Work package 7: Proof-of-principle experiments
  

Vita, L., Paulsen, U. S., Pedersen, T. F., Madsen, H. A., and Rasmussen, F., “A novel floating offshore wind turbine concept”. In Proceedings of the EWEC, European Wind Energy Conference, Marseille, France, 2009.

Vita, L., Paulsen, U.S., Pedersen, T.F., “A novel floating offshore wind turbine concept: new developments”. In Proceedings of the EWEC, European Wind Energy Conference, Warzaw, Poland, 2010

Jonkman J, “DeepCwind Scaling Laws”, NREL kick-off meeting presentation

Batista L, Zanne L “Aerodynamic design of the 2m diameter Darrieus wind turbine”, deliverable D1.2-D7.1 of the DeepWind project

Batista L, Zanne L, Brighenti A, “Second aerodynamic design of the 2m diameter Darrieus wind turbine”, deliverable D1.2 – D7.1 of the DeepWind project

Vita, L, “Notes, data and considerations on DeepWind demonstrator” April 2011, DTU internal note

M.C. Classens “The design and testing of airfoils for application in small vertical axis wind turbine”, TUDelft MSc Thesis, 2006

Carstensen S, DHI internal DeepWind report, 2011

Vita L, “Design and Aero-elastic Simulations of a 1kW Floating Vertical Axis Wind Turbine”, Risø-I-3204(EN), September 2011, technical report

Hørlyck P, “Evaluation of blades for demonstrator delivered from Nenuphar”, oktober 2012, internal DeepWind report

Klimas PC “Tailored airfoils for vertical axis wind turbines”, SAND84-1062 UC-60, February 1992

Kragh K, Finite Element Modal Analysis of the DeepWind Demonstration Model, August 2012, Internal DeepWind report

Carstensen J, DeepWind – DHI Input to WP7 Specifications, April 2011

Vita L, “Offshore floating vertical axis wind turbines with rotating platform”, PhD thesis, Risø DTU, Technical University of Denmark, August 2011, PhD-80(EN)

Vita L, Zalhe, F., Paulsen, U., Pedersen, T. F., Madsen, H., and Rasmussen, F., 2010. “A novel concept for floating offshore wind turbine: recent developments in the concept and investigations on fluid interaction with the rotating foundation”. In Proceedings of the ASME 29th International Conference on Ocean, Offshore and Arctic Engineering, Shanghai, Vol. 3, ASME.

Uwe S. Paulsen et al. DeepWind an innovative wind turbine concept for offshore. EWEA, Brussels, 2011.

EJ de Ridder et al. State of the art model testing techniques for floating wind turbines, EWEA Offshore, Frankfurt, 2013.

EJ de Ridder et al. Development of a Scaled-Down Floating Wind Turbine for Offshore Basin Testing, 33rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE), San Francisco.

Eric-Jan de Ridder, FP7 Program DeepWind – Model test vertical wind turbine, data report, report no. 24662-1-0B Volume II, March 2013

Pedersen TF, Tesauri A, Schløer S, DeepWind 1kW Demonstrator – Tests in Roskilde Fjord, DTU Wind Energy E-0053, August 2014

Pedersen TF, et.al., Design and Manufacture of an Offshore Concept Wind Turbine – the DeepWind Demonstrator, DTU Wind Energy E-0030, May 2013

     

Work package 8: Integration of technologies and upscaling

  
Schmidt Paulsen, Uwe (Author); Aagaard Madsen , Helge (Author); Nielsen, Per Hørlyk (Author); Kragh, Knud Abildgaard (Author); Baran, Ismet (Author); Hattel, Jesper Henri (Author); Ritchie, Ewen (Author); Leban, Krisztina (Author); Svenden, Harald (Author); Berthelsen, Petter A. (Author) / DeepWind. From idea to 5 MW concept. 2014. EERA DeepWind 2014 - 11th Deep Sea Offshore Wind R&D Conference, Trondheim, Norway, 22/01/14. Publication: Research - peer-review › Sound/Visual production (digital) – Annual report year: 2014


Schmidt Paulsen, Uwe (Author) / The 5 MW Deepwind Floating Offshore Vertical Wind Turbine Concept Design - Status And Perspective. 2014. European Wind Energy Association (EWEA).European Wind Energy Conference & Exhibition 2014, Barcelona, Spain, 10/03/14.Publication: Research › Sound/Visual production (digital) – Annual report year: 2014

Schmidt Paulsen, Uwe; Aagaard Madsen , Helge; Kragh, Knud Abildgaard; Nielsen, Per Hørlyk; Baran, Ismet; Ritchie, E.; Leban, K.M.; Svendsen, H.; Berthelsen, P.A.; Bussel, G.J.W.van ; Ferreira, C.S.; Chrysochoidis-Antsos, N. / The 5 MW DeepWind floating offshore vertical wind turbine concept design - status and perspective. Proceedings - EWEA 2014. European Wind Energy Association (EWEA), 2014.Publication: Research - peer-review › Article in proceedings – Annual report year: 2014

Aagaard Madsen , Helge (Author); Larsen, Torben J. (Author); Schmidt Paulsen, Uwe (Author); Kragh, Knud Abildgaard (Author) / Aeroelastic modelling of vertical axis wind turbines. 2013. Danish Wind Power Research 2013, Fredericia, Denmark, 27/05/13.Publication: Research › Sound/Visual production (digital) – Annual report year: 2013

Friis Pedersen, Troels (Author); Schmidt Paulsen, Uwe (Author); Aagaard Madsen , Helge (Author); Nielsen, Per Hørlyk (Author); Enevoldsen, Karen (Author); Tesauro, Angelo (Author); Kragh, Knud Abildgaard (Author); Vita, Luca (Author);

Ritchie, Ewen (Author); Leban, Krisztina (Author); Wedell-Heinen, Jacob (Author); Helbo Larsen, Karsten (Author) / Concept Testing of a Simple Floating Offshore Vertical Axis Wind Turbine. 2013. European Wind Energy Association (EWEA).European Wind Energy Conference & Exhibition 2013, Vienna, Austria, 04/02/13.Publication: Research › Sound/Visual production (digital) – Annual report year: 2013

Friis Pedersen, Troels; Schmidt Paulsen, Uwe; Aagaard Madsen , Helge; Nielsen, Per Hørlyk; Enevoldsen, Karen; Tesauro, Angelo; Kragh, Knud Abildgaard; Vita, Luca; Ritchie, Ewen ; Leban, Krisztina ; Wedell-Heinen, Jacob ; Helbo Larsen, Karsten / Concept Testing of a Simple Floating Offshore Vertical Axis Wind Turbine. Proceedings of EWEA 2013. European Wind Energy Association (EWEA), 2013.Publication: Research - peer-review › Article in proceedings – Annual report year: 2013

Vita, Luca; Schmidt Paulsen, Uwe; Aagaard Madsen , Helge; Nielsen, Per Hørlyk; Berthelsen, Petter A.; Cartsensen, Stefan / Design and Aero-elastic Simulation of a 5MW Floating Vertical Axis Wind Turbine. Proceedings of the ASME 2012 International Conference on Ocean, Offshore and Arctic Engineering. Vol. 7 American Society of Mechanical Engineers, 2013. p. 383-392 OMAE2012-83470.Publication: Research - peer-review › Article in proceedings – Annual report year: 2012

Schmidt Paulsen, Uwe; Aagaard Madsen , Helge; Hattel, Jesper Henri; Baran, Ismet; Nielsen, Per Hørlyk / Design Optimization of a 5 MW Floating Offshore Vertical-axis Wind Turbine. In: Energy Procedia, Vol. 35, 2013, p. 22-32. Publication: Research - peer-review › Conference article – Annual report year: 2013

Schmidt Paulsen, Uwe; Vita, Luca; Aagaard Madsen , Helge; Hattel, Jesper Henri; Ritchie, Ewen; Leban, Krisztina M.; Berthelsen, Petter A.; Carstensen, Stefan / 1st DeepWind 5 MW Baseline design. In: Energy Procedia, Vol. 24, 2012, p. 27-35.Publication: Research - peer-review › Conference article – Annual report year: 2012

 
 

Work package 9: Dissemination and exploitation 
  

”Havet venter” (2:2) DR P1 radio program (edited by Anne Kjær) 22.09.2014

http://www.dr.dk/radio/ondemand/p1/havet-venter-2-2#!/

”WindEnergie-Küchenmixer auf See”. www.deutschlandradio.de, Forschung aktuell. 12.03.2014

DeepWind: A novel floating wind turbine concept. / Vita, Luca; Schmidt Paulsen, Uwe; Friis Pedersen, Troels; Aagaard Madsen, Helge; Rasmussen, Flemming. In: Windtech International, Vol. 6, No. 4, 2010, p. 29-31.Publication: Communication › Journal article – Annual report year: 2010

“DeepWind”. Press release to Roskilde Dagblad 22.10.2012.

“Tiefer Wind auf hoher See”, 18.11.2010

”Fremtidens vindmøller skal flyde” Nyhedsbladet Dansk Energi, Flydende Vindmøller, 10.11.2010

News Paper Article about DeepWind in Berlingske Business Vækst&Viden tillæg, 5.12.2010

“Wind turbines offshore: go deep and float“ Compute Scotland 9.11.2010.

Press release of campaign testing at MARIN(NL) at the midterm meeting 11.03.2013

Synergy aspects with other institutions: Workshop at Sandia National Laboratories, Wind Energy Technologies Department (US), for the VAWT Project Kickoff Meeting March 6-7, 2012 (blade Pultrusion industry present)

(Invitation to the North America Offshore Wind Development & Finance Summit 2011, Washington on DeepWind’s contribution to the subject “the floating offshore wind technologies” Uwe Schmidt Paulsen DeepWind- tomorrow’s concept for large offshore wind power)

Webinar: The development of more cost-effective MW wind turbines through dedicated technology-The DeepWind project Offshore Wind Power Europe, 15 & 16 February 2011

Future wind turbines go offshore – deep and floating. Internal DTU Press Release October 2010

Presentation of a small model is made for conferences and for demonstration to the public, see Figure 4.

An example of a description for engineers to connect with DeepWind is also shown.

 


Figure 4. Conference, Workshop and demonstration model, presented first time EWEA 2012 Copenhagen

 

http://www.deepwind.eu/publications/external-publications
14 DECEMBER 2018